Roto-Mix Hay Pro 533-16, Operation And Parts Manual

Page: 20 / 57

Page 20
LUBRICATION - TRUCK MOUNT
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND REMOVE KEYS FROM TRACTOR OR TRUCK BE-
FORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN
SERIOUS PERSONAL IN JURY OR DEATH.
LOCA-
TION ITEM LUBRICATION INTERVAL
A
Rear Drive
Oil Bath SAE 30. Approximately
10 Gallon Capacity. Check every 60 Days. Keep filled to sight plug. Change if
contaminated.
B Conveyor
Chain Light Weight Oil Brush on lightly every 40 hours of operation.
C Front
Bearings Standard All Purpose
Grease Every 100 hrs.
D Conveyor
Bearings Standard All Purpose
Grease One pump every 8 hours of operation.
E
Bearings in
Rear Drive Standard All Purpose
Grease
Three pumps every 100 hrs. for each zerk in grease bank.
F Gearbox
Mobil Delvac Synthetic
Gear Oil 75W-90
Prior to operation, remove the upper most plug and replace
with vent plug provided. After first 100 Hrs. of operation,
drain the oil. flush gear case with an approved non flamma-
ble, non toxic solvent and refill with oil. There after oil
should be changed every 2000 Hrs. or 12 months.
G U-Joint Standard All Purpose
Grease Every 10-20 hrs.
Truck
Chassis See Manufacturer’s
Recommendations.