Roto-Mix 425, Operator'S Manual

Page: 57 / 92

Page 57
TOP LEFT AND BOTTOM RIGHT AUGER DRIVE
KEY PART NO. DESCRIPTION
1 157165 Spring - Ext
2 157048 Turnbuckle 3/8 x 5
3 158885 Chain - #120 x 85P
4 160219 UHMW Idler, 3.5 OD x 3.375”
5 159275 Drive End Plate
6 158867 Tube Key - Short
7 158881 Sprocket - 120A45 x 1.75 Bore, 6 Bolt
8 158808 Rear Auger Bearing Assembly
8a 158812 Nyloil Bearing Insert - Rear
8b 158813 Oil Seal, 7.5” Dia.
8c 158809 Bearing Housing
10 158878 Bearing 3.5 EC Series PB
11 158875 Jack Shaft
12 158866 Stub Shaft
13 158987 Sprocket Spacer
14 158986 Rear Drive Spacer
15 158868 Tube Key - Long
16 158879 Sprocket - 140A60 x 1.75 Bore, 6 Bolt
17 158884 Chain - #140 x 74P
18 158880 Sprocket - 120A30 x 1.75 Bore, 6 Bolt
19 156298 Flange Bearing, 1.938”
20 159195 Idler Shaft
21 158869 Input Stub Shaft
22 V94128 Bearing Flanged Housed 2 ID
23 158761 Idler Arm
24 158756 Idler Stand - 1.75
25 19226 HHCS, 5/8-11 x 2 ZP, GR5
26 P468 Lock Washer, 5/8” ZP
27 P946 Hex Nut, 5/8-11 ZP
28 P5623 HHCS, 1/2-13 x 1-1/2 ZP, GR5
29 157283 Rubber Washer, 1/2
30 P467 Lock Washer, 1/2 ZP
31 P445 Hex Nut, 1/2-13 ZP
32 P5664 HHCS, 3/4-10 x 4 ZP, GR5
33 P461 Flat Washer, 3/4” ZP
34 P2689 Lock Washer, 3/4” ZP
35 P3233 Hex Nut, 3/4-10 ZP
36 P5603 HHCS, 3/8-16 x 1 ZP, GR5
37 P5614 Flange Nut, 3/8-16
38 P1144 Flat Washer, 5/8” ZP
39 P3039 Lock Nut, 5/8”-11, ZP
40 157792 HHCS, 5/8-11 x 5.5 ZP
41 159370 HHCS, 3/4-10 x 3-1/4 ZN, GR5
42 P2689 Lock Washer, 3/4” ZP
43 P5637 HHCS, 5/8-11 x 2-1/2 ZP, GR5
44 141763 Flange Nut, 5/8-11
45 157072 HHCS 3/8-16 x 5/8 Brass
46 P465 Flat Washer 3/8 ZP
47 156928 Bearing - Spherical 1.938”