Roto-Mix 425, Operator'S Manual

Page: 27 / 92

Page 27
LUBRICATION - TRUCK MOUNT
ALWAYS DISCONNECT AND LOCKOUT ELECTRICAL POWER (STATIONARY MODELS) OR DISENGAGE
POWER TAKE OFF AND REMOVE KEYS FROM TRACTOR OR TRUCK BEFORE CLEANING, ADJUSTING,
LUBRICATING OR SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH.
LOCATION ITEM LUBRICATION INTERVAL
A
Rear Drive Oil
*
SAE 30 Check Every 60 Days
Change If Contaminated
B
Conveyor Chain Light Weight Oil Brush On Lightly Every 40 Hours Of
Operation
C
All Drive Shaft Bearings Standard All Purpose Grease One Pump Every 8 Hours Of Opera-
tion
D
Conveyor Bearings Standard All Purpose Grease One Pump Every 8 Hours Of Opera-
tion
E
Bearings In Rear Drive Standard All Purpose Grease Three pumps every 8 hrs. For each
zerk in grease bank.
F
Guides For Discharge Door Standard All Purpose Grease Lubricate Every 40 Hours Of Opera-
tion
G
Gearbox SAE90 All Purpose Gear Lube Change After First 100 And Every
2500 Hours After. Check Every 40
Hours Of Operation
H
U-Joint Standard All Purpose Grease Every 6 Months
I
Truck Chassis See Manufacturers
Recommendations
* Refill the rear drive to a point 1" up on the lowest sprocket, approximately 10 gallons (total capacity).
F
H
D
B G
I
E
A
C