Roto-Mix 425, Operator'S Manual

Page: 41 / 92

Page 41
TRUCK MOUNT GROUP
KEY PART NO. DESCRIPTION
1 160028 Weld Light Bar
2 160046 Bracket Light Mount
3 160092 Light, Red Clearance 12V
4 160093 Light, Bunk, Rubber, HSG 12V
5 160137 Conduit-575
160139 Conduit-500
160428 Conduit-425
6 160137 Wire Run Conduit
7 160039 Bracket, Bunk Light
8 160091 Light, Amber Clearance 12V
9 160090 Cable, Braided Ground
12 144623 Screw, PHMS #10-32 x 1/2 PH ZP
NS 151295 Wire, Electric 14 GA Red
NS 151297 Wire, Electric 14 GA Green
NS V92838 Conn-Butt 16-14 GA
NS V754 Tube, Heatshrink 1/4 Dia. Black
NS S830413 Clip, Cable Frame
18 159909 CT Outer Saddle Mount
19 159913 CT Inner Saddle Truck Mount
20 159917 Cross Supt-CT Saddle Mount
21 P5630 Screw, HHCS 1/2-13 x 1.25 ZP, GR5
22 P5631 Nut, Hex 1/2-13 Serrated Flange
23 114809 HHCS 1/2-13 x 1.75 ZP, GR5
24 19225 HHCS 1/2-13 x 2.0 ZP, GR5
25 160245 Auxiliary Truck Mount Assembly
26 160057 Weld Anti Sail
27 160230 Mud Flap, Rear
28 160231 Mud Flap, Front
29 159951 Fender
30 222406 Angle, 5.0 x 3.0 x .25 M1020 (Specify Length)
31 160027 Fender Mount Beam
32 103303 Bolt, CRG 3/6-16 x 5
33 P5614 Nut, Hex 3/8-16 Serrated Flange
34 160078 Reservoir - 10 Gallon
36 159988 Bumper - Weld On
37 847360 U-Bolt, 5/8-11 x 10.5 Sq.
38 159982 Gearbox Mount, Front
39 P3039 Hex Nut, 8/5-11 Lock
40 159983 Gearbox Mount, Back
41 159992 Mixer Mount
42 158222 Manual Storage Case