3.
The
4-Post Lift
10
Rev. D 2013_03_en
6 Pressure control valve
The pressure control valve (
arrow) is factory
set to ca. 210 bar.
Prevents a sudden lowering of the lift in the
event of a leak in the hydraulic hose (lowering
speed = max. 1.5 x default speed).
7 Lowering valve (emergency release) and
emergency manual valves
●
Pos. 7.1 Lowering valve for emergency re-
lease of the main lift or the rolling jack
(Fig. 12 = default configuration).
●
Pos. 7.2 and 7.3: Emergency manual valve
for main lift and rolling jack. Fitted differently ac-
cording to variant. Before use check assignment
to main lift and rolling jack
.
During a power failure the valves close and
stop any movement.
8 Broken cable and slack cable switch
●
Pos. 8.1: Broken cable switch:
This switch is activated if the cable is broken. All
movement of the post lift stops immediately. The
control buttons will not function. Consult a com-
petent person for repair.
●
Pos. 8.2: Slack cable switch:
This switch is activated when the cable is too
slack. All movement of the post lift stops imme-
diately. The Down button will not function. The
Up button will however function in order that the
cable can be pulled tight again by raising the lift
slightly.
10
11
12
13
i
