58
|
20. Demo Presets
The following presets were provided by
some of our talented beta testers to highlight
some of Control Forge’s capabilities. In most
cases, you can check them out with the basic
patch described below. If a different patch
is required for a particular preset, it will be
described in that preset’s listing.
The basic patch
>
Patch the
+Output
to the CV in of a
VCO and/or VCF and/or VCA or other
processor. (It’s easiest to clearly hear
what’s happening with a preset by
listening to its effect on a VCO.)
>
Patch the
Trigger 1
output to the gate
input of an envelope or other triggered CV
source.
>
Patch the output from a gate or trigger
source into the
Gate/Trig
input.
>
Patch a CV source into the
Time Scale CV
input (preferably through an attenuator).
Presets 400–446
Presets 400 to 446 were created by
composer and sound designer
Kurt Kurasaki.
With a few exceptions, they are programmed
to use the CV 3 and CV 4 knobs to modify
the presets’ behavior in one way or another
without having to patch up external CVs.
Once you understand what they are capable
of, you can, of course, replace the CV 3 and
CV 4 conditional tests with CV 1 and/or CV 2
from other modules in your system.
In many of Kurt’s presets, adjusting
CV 4
controls the
number of segments
in the
pattern. Doing this while the preset is running
can result in intricate rhythmic and tonal
variation. Be sure to try it. It’s clever and
addicting.
For quick access to the various preset
categories, you can load
Preset Sequences
1-4
that each contain the presets of their
own category.
Presets 400–409: Sequences
In each preset,
Trigger 1
fires at the
beginning of every segment.
Trigger 2
fires at
the beginning of Segment 1.
400 [Sequencer]
(Group marker of Sequencer Presets)
Sequence of volt/oct values that shift relative
to segment 1
CV3 Controls the Quantized Value of Seg 1.
CV4 Controls the Number of Segments in
the Pattern.
401 CV3 5ths
Sequence of volt/oct values that shift relative
to segment 1
CV3 Controls the Quantized Value of Seg 1.
CV4 Controls the Number of Segments in
the Pattern.
402 CV3 oct
Sequence of volt/oct values that shift by
octaves relative to segment 1.
CV3 Controls the Quantized Value of Seg 1.
CV4 Controls the Number of Segments in
the Pattern.
403 CV3 Slides
Sequence of volt/oct values that shift relative
to seg 1, 3, 7.
CV3 Controls the Quantized Value of Seg 1.
CV4 Controls the Number of Segments in
the Pattern.
Summary of Contents for Control Forge
Page 70: ...70 ...
