Rossum Control Forge, Operation Manual

Page: 20 / 70

20 |
value within the range may be selected. If
Gaussian, values nearer to the target level are
more likely to be selected than values nearer
the extremes of the range.
NOTE:
While these last two parameters
look pretty much identical to the Reset
Random Level and the Reset Random
Shape parameters above, they are completely
independent of each other. The “ Reset ”
parameters only apply to the level at the
beginning of a contour. These last two only
apply to real-time pressing of the
Randomize
button during play.
Scale All Times
This function recalculates all of the preset’s
segments’
Time parameters by the selected
multiplier. Use it to adjust the overall duration
of a contour while keeping the relative time
relationships of all of the segments intact.
The range of multiplier is from 0.031x to
32.0x. The initial value when the editor
appears is the most recently captured
Time
Scale value set by the encoder from Play
Mode (if any). Once completed, the Encoder
Time Scale is reset to 1.
NOTE:
This is a destructive function. After
executing a time scaling, if you examine
the individual
Time values of the preset’s
segments, you’ll find that they have been
changed to the multiplied values. Of course,
if you later change your mind, you can always
execute another scaling that’s the inverse of
any previous one.