background image

Your eQuad S also features an alarm that when set will sound if the ATV is move or the key is
inserted into the ignition. To activate the alarm press the “lock” 

🔒

 button, to turn the

alarm of press the “unlock”button.  To activate the alarm directly by pressing the “siren” 

🔊

button.

Please note: The fob requires 1x CR2032 battery. (pre-installed) To replace the fob battery
first remove the key ring from the fob, then carefully, with a small screwdriver, pry off the
silver side pieces. Once they are removed the 2 halves of the black fob body can be
separated revealing the interior components and battery slot. Once a new battery is
installed, reassemble the fob in the reverse order.

Battery Level Indicator

The battery level indicator is located on the throttle handle on the right handlebar. The
lights indicate the current battery level from full to empty and are also an easy way to tell if
your ATV is turned on. If you turn your ATV off and the lights do not turn off, it may indicate
that it was started with the other method of power up. (Manual keys vs Remote fob)

3 Speed Switch

Using the provided speed switch keys, the speed setting can be changed by turning the key
to the desired speed. Once the speed is set and keys removed the ATV is locked into that
speed setting. Do not leave the key in the 3 speed switch while operating the ATV. Speeds
setting for your e Quad S are: (L)ow - 4-8 km/hr(3-5 MPH) (M) - 11-13 km/hr(8-9 MPH) (H)
16-20 km/hr(11-13 MPH)

Gear Shifter

To change between forward and reverse, while stationary, turn the gear shift knob, located
on the body between the rider’s legs, to the desired position. Turn the knob to off for
neutral.

Always bring the vehicle to a complete stop before changing gear, failing to do

so will result in damage to the switch.

Parking Brake

Locate the parking brake knob on the front brake lever on the right handlebar. To engage the
parking brake, squeeze the front brake lever and press down the parking brake knob. To
disengage the parking brake squeeze brake lever until the knob pops up.

10

Summary of Contents for E-QUAD S

















Reviews: