Fully charge battery before storing for an extended period of time and then every 4-6
weeks. Failure to recharge battery periodically may result in reducing battery life time and
can result in a battery that will not accept a charge.
Do not leave charging overnight unattended. Unplug charger from the wall outlet when not
in use.
Make sure the electric ATV power switch is turned OFF when the unit is not in use.
To ensure long battery life, never store the product in freezing or below freezing
temperatures! Freezing will permanently damage the battery.
Run time is up to 120 minutes of continuous ride time. Run time may vary depending
on riding conditions, rider weight, climate, and/or proper maintenance. Constant stopping
and starting may shorten ride time.
⚠
Charge the battery
ONLY
with the supplied charger.
Batteries are only to be charged under adult supervision.
Always disconnect the charger before wiping down and/or cleaning the ATV.
The charger supplied with the ATV should be regularly examined for damage to the cord,
plug, enclosure and other parts. In the event of such damage, the ATV must not be
charged until it has been repaired or replaced.
Chargers have built-in over-charge protection to prevent the battery from being
overcharged.
Note: If the charger gets warm during regular use, this is a normal response and is no cause
for concern. If your charger does not get warm during use, it does not mean that it is not
working properly.
Ignition Switch / Alarm & Key Fob
Your Rosso eQuad S can be turned on/off using
2
different methods.
The ATV can be turned on manually by placing the key into the ignition switch (located on
the right side of the ATV) and turning it to the on position. Once turned on manually, the ATV
can
ONLY
be turned off by manually turning the key back to the off position.
The e Quad s also features remote start/stop via the included fob. Once the ATV has been
turned on remotely it can
ONLY
be turned off with the fob. To turn on the ATV remotely,
press the “power”
⚡
button on your fob TWICE. To turn the ATV off, press the “unlock”
🔓
button on the fob.
Cont. next page…
9
