Installation
AYC-Ex5/T65 Series Installation and Programming Manual
13
3.
Splice the reader’s pigtail wires to the corresponding controller
wires and cover each joint with insulating tape.
4.
If the tamper output is being utilized, connect the purple wire to
the correct input on the controller.
5.
Trim and cover all conductors that are not used.
•
The individual wires extending from the reader are color-coded
according to the required Wiegand standard.
•
When using a separate power supply for the reader, this supply and
the controller’s power supply must have a common ground. A linear
power supply is recommended.
•
Attach the cable shield wire on the reader to an earth ground (best),
or to a signal ground connection at the panel or power supply end
of the cable. This configuration is best for shielding the reader
cable from external interference.
2.2.2
Wiring the Unit as a Controller
If you connect the unit to a Rosslare secured power supply, it
automatically functions as a controller.
To connect the unit as a controller:
1.
Select the appropriate connections according to Table 2.
Table 2: Wiring the Unit as a Controller
Controller
Wire Color
Function
Note
-
Red
+DC Input
Wired to the PS-x25x
+
Black
Ground
Wired to the PS-x25x
C 1
White
Communication Wired to the PS-x25x
C 2
Green
Communication Wired to the PS-x25x
AUX. IN
Brown
Auxiliary Input
Wired to input
N/A
Purple
Not in use
N/A
