Rosslare AYC-B7661, Installation Manual, Page: 9 / 33

Introduction
AYC-B7661 Installation Manual 9
1.2 Controller Features
If you connect the unit to a Rosslare PS-x25 secured power supply, it
automatically functions as a controller.
When using the AYC-B7661as a controller, it includes the following
features:

MIFARE card reading followed by fingerprint reading (in 1:1
mode)

Rosslare's algorithm for ID code derived from the fingerprint
template (in 1:N mode)

The tamper output signal triggers the siren

Request to exit (REX) signal comes from the PS-x25 secured power
supply
Pressing the REX unlocks the door that connects to output (PS-
x25). The duration that the door is unlocked is configurable using
the configuration card (1 to 99 seconds).

Bell feature is available with the PS-x25 secured power supply –
Depends on the AUX input

Programmable door lock timer

Ability to enable or disable auxiliary input, output, and bell

No PC is required for fingerprint enrollment (unit uses cards to
configure fingerprint templates)

REX input

Lock output

Aux input – This is the brown wire (LED control in Reader mode).
The AUX input can either activate the AUX output for the time
configured according to the Configuration card (1 to 99 sec) or
activate the AUX output to toggle for every AUX input event. In
addition, user can select the AUX input to activate the bell. The
user can enable or disable all the AUX input features using the
Configuration card.

Aux output – Depends on the AUX input