Modes of Operation
26
AYC-B7661 Installation Manual
6.
Modes of Operation
The AYC-B7661 has the following modes of operation:
Boot Mode (reset)
Configuration Mode
Standby Mode
Read Mode
Lockout Mode
Factory Defaults
6.1
Boot Mode
The reader enters Boot mode upon power up or upon restoration of
power after a power failure where the loader runs separately from the
main application. The Boot mode lasts for approximately three
seconds, during which the red LEDs flash simultaneously.
6.2
Configuration Mode
Refer to Section
4.2 on how set the reader to Configuration mode.
The Configuration card is configured using the Desktop Reader
(CP-R26) and the Card programmer and Fingerprint enrollment.
Refer to the
CP-R26 Hardware and AS-B01 Software Manual
for
more details.
6.3
Standby Mode
The reader enters Standby mode:
After the Boot (reset) and Configuration modes
After the Lockout mode period
After a successful card or fingerprint read
During Standby mode, the left red LED remains lit to indicate Standby
mode and the reader is ready for normal use.