Fingerprint Enrollment
AYC-B7661 Installation Manual
21
5.
Fingerprint Enrollment
After configuring the unit, either as a reader or as a controller, you
need to enroll fingerprints (1:N) or fingerprints and cards (1:1) into
the unit.
For configuration and fingerprint enrollment, you need to use the
following pre-configured cards:
Enroll
Add card
Delete
+1
+10
You need Rosslare's CP-R26 unit to generate these cards.
5.1
Enrollment in 1:N Mode
In 1:N mode, the unit identifies users according to their fingerprints
only.
Before enrolling users, it is recommended to create a list of all users
and their record number (see Appendix
A
). The unit accepts up to 107
users.
To enroll fingerprints:
1.
For first time use, configure the reader as explained in Chapter
4
.
2.
When the reader is in Standby mode, present the Enroll card to
the reader. Both LEDs flash orange.
The 'enroll', '+1','+10', 'add card', and 'delete' are the same
for both the 1:1 and 1:N modes
.