manualshive.com logo in svg

Ross Ultricore RCP-ME, User Manual, Page: 79 / 98

Share
Download
Ross Ultricore RCP-ME User Manual Download Page 79

RCP-ME User Guide (v4.0)

Monitoring • 79

To check the firmware version of a RCP-ME using DashBoard

1. Launch 

DashBoard

.

2. In the 

Basic Tree View

, expand the node for the required RCP-ME.

3. Double-click the 

Panel Config

 node.

The 

Panel Config 

interface opens.

The firmware version is shown in the 

Version

 field located at the top of the interface.

Upgrading the Firmware Version

Firmware upgrade files can be obtained by contacting Ross Video Technical Support.

To upgrade the RCP-ME firmware

1. Launch 

DashBoard

.

2. In the 

Basic Tree View

, expand the node for the required RCP-ME.

3. Double-click the 

Panel Config

 node.

The 

Panel Config 

interface opens.

4. Click 

Send Firmware

.

The 

Open

 file dialog opens.

5. Navigate to where you have stored the firmware file and select it.

6. Click 

Open

.

The 

Confirm Upload

 dialog opens.

7. Click 

Continue

.

A progress bar displays. When the upload has completed, a confirmation dialog opens.

8. Click 

OK

.

9. Click 

Reboot

 to restart the device and activate the new firmware.

Troubleshooting the Upgrade

If you encounter problems when upgrading your RCP-ME, verify the following:

• Your network settings on the RCP-ME are valid.
• The ethernet cable is properly connected.
• The file you are attempting to load is the correct file for the panel you are upgrading.

Summary of Contents for Ultricore RCP-ME



































































































Reviews:

No comments