Ross Ultricore RCP-ME, User Manual, Page: 75 / 98

RCP-ME User Guide (v4.0) Managing Panel Configurations • 75
Loading the Factory Defaults Using DashBoard
If you need to return the RCP-ME to a known configuration, you can use DashBoard to load the factory defaults.

This defaults the RCP-ME panel configuration (Panel Config interface settings) only, and not the connection
configuration (Connection Editor).
To load the factory defaults
1. Open the RCP-ME Panel Config interface (see “ To open the RCP-ME Panel Config interface ” on page 22).
2. Select the Configuration tab.
3. In the Configuration section, select the Load Factory Defaults check box.
4. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).

Ensure that only the Home page box is selected in the Send Configuration dialog. De-select all other pages or
they will be sent to the device as well, thus changing the factory defaults.
The factory defaults are loaded.