Ross softGear, User Manual

Page: 18 / 70

18 • Integration Example BAP User Guide (v1.0)
An overview of accessing the BAP in DashBoard is provided in the chapter “ Using DashBoard ”. For
information on the tabs, menus, and parameters available in Dashboard, refer to “ DashBoard
Interface Overview ”.
Connect to an NTP Server
Once the user can successfully access the BAP in DashBoard, the next step is to establish a
connection to an NTP Server. The BAP requires an accurate time reference, in order to ensure
correct watermarking and crediting. Refer to “ Specifying the Video Format ”.
Configure the SDI Outputs
The next step is to configure each SDI output independently. The following steps are required for
each SDI output:
1. Map the audio channels from the SDI inputs to channels in the SDI outputs. Refer to “
Channel
Mapping ”.
2. Map the SDI output paths. Refer to “ Mapping the Output Paths to an SDI Output ”.
3. Configure the Real-Time Loudness Leveling settings. Refer to “ Real-Time Loudness Leveling ”.
4. Map the Channels to a Watermark Engine. Refer to “ Watermark Encoders Setup ”.
5. Configure the Dolby® Encoder Channels. Refer to “ Configuring the Dolby Encoders ”.