Ross QRA-8808, User Manual

Page: 13 / 32

QRA-8808 User Guide (v5.0) Hardware Overview • 13
Hardware Overview
This chapter provides a general overview of the user controls available on your QRA-8808.
Card Overview
This section describes the
Bootload
button located on each card surface. There are no other card-edge controls as
all configuration and setup is done using the menus in DashBoard. Refer to Figure 3.1 for location of this button.
Figure 3.1 Card-edge Controls
1. Bootload Button
This button is used for factory service in the unlikely event of a complete card failure. Do not use this button
unless advised by Ross Technical Support.
For More Information on...
• the Bootload process, refer to the section “ Bootload Button ” on page 29.
Monitoring Features
The following sections describe the card-edge LEDs. Refer to Figure 3.2 for LED locations.
Figure 3.2 LED Locations
Bootload Button
PWR LED
INPUT A LED
INPUT B LED
INPUT C LED
INPUT D LED