Ross QRA-8808, User Manual

Page: 14 / 32

14 • Hardware Overview QRA-8808 User Guide (v5.0)
Status LEDs
Basic LED displays and descriptions are provided in Table 3.1 .
Table 3.1 Status LEDs
LED Color Display and Description
PWR
Green When lit green, this LED indicates that the card is functioning normal
and that no anomalies have been detected.
Flashing Green When flashing green, this LED indicates that the Bootload button was
pressed, and the card is receiving a new software load from the frame.
Flashing Green
and Orange When lit green with flashing orange, this LED indicates a signal or
configuration problem. Verify the signal status and settings.
Amber When lit amber, this LED indicates the card is running internal
diagnostics while powering up.
Red When lit red or flashing red, this LED indicates the card is not
operational. Re-seat card in frame, check the rear module type and
connections, or call Ross Video Technical Support.
Off When off, this LED indicates there is no power to the card.
INPUT #
a
a. The INPUT A LED reports on the Channel A source, the INPUT B LED reports on the Channel B source, the INPUT
C LED reports on the Channel C source, and the INPUT D LED reports on the Channel D source.
Green When lit green, this LED indicates that a valid SDI input signal is
present for the specified channel.
Red When lit red, this LED indicates that the SDI input signal is missing
or invalid for the specified channel.