Ross QRA-8808, User Manual

Page: 25 / 32

QRA-8808 User Guide (v5.0) DashBoard Menus • 25
Product Tab
Table 8.3 outlines the read-only information displayed in the Product tab.
Setup Tab
Table 8.4 summarizes the Setup options available in DashBoard.
Table 8.3 Product Tab Items
Item Parameter Description
Product QRA-8808 Displays the card model
Supplier Ross Video Ltd. Indicates the manufacturer of your card
Board Rev ## Indicates the version of the PCB
Board S/N ###### Indicates the card serial number
Rear Module # Indicates the installed rear module
Unknown Indicates that the installed rear module is not
recognized by the card
Software Rev ##.## Indicates the software version
Table 8.4 Setup Menu Items
Item Parameter Description
Channel #
Input BNC # (read-only) Indicates the BNC on the rear module that is
assigned as the input source for the specified
channel
N/C Indicates that no BNCs are currently used as inputs
for the channel
Output BNCs # (read-only) Indicates the BNC on the rear module that are
assigned as the outputs for the specified channel
N/C Indicates that there are no outputs in this channel
Enable Failover Selected The specified channel will use the backup input
when the primary input of the channel is lost. The
backup input signal must be stable for 3 seconds.
Note that the card returns to the primary input once
the primary input signal is stable for 3 seconds.
Cleared* Disables this feature
Enable Equalizer Selected* Equalizer is always enabled
Cleared Sets the equalizer in bypass mode
Enable Reclocker Selected* Reclocker is always enabled
Cleared Sets the reclocker in bypass mode
Reclocker Rate Auto* Card automatically detects the incoming data rate
270Mbps Reclocker is set to 270Mbps
1.5Gbps Reclocker is set to 1.485Gbps
3.0Gbps Reclocker is set to 2.97Gbps