HDC-8222A User Manual (Iss. 02)
Menus • 4–15
Loading the Factory Defaults
The HDC-8222A can be set to the default factory setting locally using the card-edge controls or
remotely through DashBoard. The method is determined by how
S1.1
is configured.
To reset to the default settings using the card-edge controls:
Locally the HDC-8222A can be set to the factory defaults by
1.
Set
S1.1
to
OFF
on the card-edge. This enables the HDC-8222A to be configured
locally using the controls available on the card-edge.
2.
Set
S3
to position
9
.
3.
Set
S4
to position
7
.
4.
Toggle the
Menu Select Switch
(
S2
) up. The three LEDs will flash.
To reset to the default settings using DashBoard:
1.
Ensure that
S1.1
is set to
ON
on the card-edge. This enables the HDC-8222A to be
controlled remotely via DashBoard.
2.
In DashBoard, display the
Device View
of the card by double-clicking its status
indicator in the
Basic Tree View
.
3.
From the
Device View
, select the
Miscellaneous
tab.
4.
From the
Factory Defaults
area, click
Load
to display the
Confirm
dialog.
5.
Click
Yes
to load the factory default values for all menu parameters, or
No
to cancel the
load and close the dialog.
Summary of Contents for HDC-8222A
