HDC-8222A User Manual (Iss. 02)
Installation • 2–5
Cabling for the HDC-8222A
This section provides information for connecting cables to the installed Rear Modules on the
DFR-8300 series frames. Connect the input and output cables according to the following sections.
The input is internally terminated with 75ohms. It is not necessary to terminate unused outputs.
Note that the number and type of outputs is dependent on the rear module you are using.
DFR-8310 Series Frame Cabling Overview
In the DFR-8310 series frames, the HDC-8222A is used with the following Rear Modules:
•
8310AR-030
Rear Module — Each card occupies one slot and provides one HD/SD-SDI
input, four output copies of the re-clocked input, and four SD-SDI/CVBS outputs.
(
Figure 2.2
).
DFR-8321 Series Frame Cabling Overview
In the DFR-8321 series frames, the HDC-8222A is used with the following Rear Modules:
•
8320AR-030
Full Rear Module — Each card occupies two slots and provides one
HD/SD-SDI input, four output copies of the re-clocked input, and four SD-SDI/CVBS
outputs. (
Figure 2.2
)
•
8320AR-1821
Full Rear Module — Each card occupies two slots and provides one SDI
input, two output copies of the re-clocked input, two SDI-Composite outputs, and four
analog audio outputs. (
Figure 2.3
)
Figure 2.2
Cable Connections for the
8310AR-030 and 8320AR-030 Rear Modules
Figure 2.3
Cable Connections for the
8320AR-1821 Rear Module
Summary of Contents for HDC-8222A
