Ross Abekas Tria News, User Manual

Page: 51 / 59

2. Click the RS422 tab.
3. Click Room
X
Configuration and select the room you want to configure. Later you will assign this room to a
channel.
4. In the RS422 Protocol area, select AMP .
5. In the Edit Timing area, select a timing offset for when you are controlling the server from an external editor over
serial.
•
Timecode Alignment — select the offset, in frames, of the timecode information that is sent to the editor
during playout or record.
•
Source Alignment — select the offset, in frames, of the timecode information that is sent to the editor during
playout.
• Out Point Offset
— select the offset, in fields, of the out-point timecode value that is sent to the editor during
record.
6.
In the
Video Edit Effect
area, select which tracks get recorded when an external editor issues the Video Record
command to the server.
•
Edit Video Track — only the video track is recorded.
7. In the AMP Protocol Configuration area at the bottom of the window, select specific configurations for the
protocol you are using.
• Select
Disable field timecode reporting
to force the server to report timecode only once every video frame.
If this option is not selected, the server reports timecode every field.
• Select Allow overlapped commands to allow the server to accept overlapping commands.
• Select Allow playlist control to allow control over the playlist.
• Select
Inhibit file extensions (.mov and .mxf) in clip ids to hide file extensions in clip IDs.
• Select the
Protocol ID that you want to use ( Abekas 6000 , Sony BVW-75 , or Generic DDR ).
8.
Click on the Ch- X : list and select the room that you want to assign to the channel.
9.
Click Restart Tria . A confirmation dialog box is displayed.
10.
Click Restart Tria to restart the server application and services with the new setting.
11.
Click OK when the restart has completed to dismiss the window.
Tria News User Manual — Remote Control Support • 51