Ross Abekas Tria News, User Manual

Page: 21 / 59

1. Click Configure > General Configuration and click the Channels tab..
You may have to log in with a different account if your current account does not have permissions.
2. On the left side of the window use the drop-down list to select the server that you want to assign a channel transport
to. The number of channel transports that are available depends on the server model you have.
3. On the right side of the window use the drop-down list to select the channel transport that you want to assign to the
server.
Installing Tria Explorer on a Remote PC
You can install the Tria Explorer application on a remote PC and connect to the server over ethernet to control channel
transports.
You can download the installer file from
www.rossvideo.com/support/software-downloads/ .
Keep the following in mind when setting up and using a remote pc to control a server:
•
Tria Explorer only runs on the Microsoft ® Windows ® 7 or 10 operating systems.
• The Phoenix application needs access through the firewall on the server and remote PC. This will include the
Windows ® firewall, as well as any other network security applications operation on your PC or network.
• A physical channel can only be assigned to one virtual channel. If you want to assign a channel transport on a remote
PC to a physical channel on a server, you must unassign the physical channel from the server first and then assign a
virtual channel on the remote PC to it.
• Physical channels are identified by the server they are located on. The name of a server is shown in the upper-right
corner of the
Tria Explorer
window.
To Install Tria Explorer on a Remote PC
Installing the software on a remote PC and the server itself are the same and use the same executable file.
Tria News User Manual — Tria Explorer • 21