4.
Drag and drop clips within the TC Chase List to order them how you want them to play out.
Tip:
You can click
Save
at any time to save the current state of the TC Chase List.
5.
Double-click on the time in the
TC Offset Trigger
column for the clip you want to edit and enter the timecode
value at which you want this clip to start playing. For example, if you want the clip to start playing at timecode
01,00,30,00, enter
01,00,30,00
.
6.
If required, double-click on the time in the
Clip TC Offset
column for the clip and enter the point in the clip at
which you want it to start. This is an offset from the in point of the clip. For example, if you want the clip to start
playing 5 seconds into the clip, enter
00,00,05,00
.
7.
Repeat these steps for every clip in the TC Chase List.
8.
Click
Save
.
To Air a TC Chase List
Take the TC Chase List on-air to play each clip in order at the specified timecode values.
Note:
A TC Chase List has no mix transition and only uses a single channel transport.
1.
Double-click on the TC Chase List you want to air in the Clip Library.
2.
Select the channel transport that you want to play the TC Chase List on.
3.
Click
START TC Chase
on the
TC Chase Editor
window.
The
TC Chase Editor
window changes to the
TC Chase ON-AIR
window. As the timecode reaches the point for
each clip, the clip is highlighted red and plays out on the channel transport. The channel transport outputs black if no
clip is scheduled to play during the current timecode.
Folders
Clips are stored on the media drive in the server, or on external servers connected to the server you are using. You can
organise the clips into folders on the media drive either from Windows
®
Explorer or from the Clip Library.
38
• Clip Library — Tria News User Manual
Summary of Contents for Abekas Tria News
Page 1: ...Tria News User Manual...
