Ross Abekas Tria News User Manual Download Page 3

Document Information

• Ross Part Number: 

 4606DR-120-07.1

• Release Date: November, 2019.

Copyright

©

2019 Ross Video Limited, Ross

®

, Abekas

®

, AirCleaner

®

,Tria, Tria+, Mira, Mira+, Tria Express, Mira Express, Tria

News, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are

the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this

publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical,

photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has

been taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is

any liability assumed for damages resulting from the use of the information contained herein.
Microsoft

®

, Windows

®

, and Windows XP

®

 are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.
Macintosh

®

, OS X

®

, Apple

®

, and QuickTime

®

 are trademarks of Apple Inc., registered in the U.S. and other countries.

Google Chrome

, Google

®

, and the Google logo are registered trademarks of Google Inc.

FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
Bethesda, Bethesda Softworks and Bethesda Game Studios and their respective logos are registered trademarks of

ZeniMax Media Inc. in the U.S. and/or other countries. All Rights Reserved.
ZeniMax and its logo are registered trademarks or trademarks of ZeniMax Media Inc. All Rights Reserved.

©

 2011 ZeniMax Media Inc. Brink, Bethesda Softworks, ZeniMax and related logos are registered trademarks or

trademarks of ZeniMax Media Inc. in the U.S. and/or other countries. Developed in association with Splash Damage Ltd.

Splash Damage and the Splash Damage logo are registered trademarks or trademarks of Splash Damage Ltd. All Rights

Reserved.
GoPro

®

 and Cineform

®

 and their respective logos are trademarks or registered trademarks of GoPro, Inc.

Creative are trademarks or registered trademarks of Creative Technology Ltd or Cambridge SoundWorks, Inc. in the

United States and/or other countries.

©

 2019 OpenEXR, Industrial Light & Magic and ILM are trademarks and service marks of Lucasfilm Ltd.; all associated

intellectual property is protected by the laws of the United States and other countries. All rights reserved.
Mirillis is a registered trademark of Mirillis Ltd. Read more at: https://mirillis.com/

©

 2019 - fraps

®

 and beepa

®

 are registered trademarks of Beepa Pty Ltd - ACN 106 989 815

LogMeIn, and GoToMeeting are the trademarks and service marks of LogMeIn, Inc., and may be registered in the U.S.

Patent and Trademark Office and in other countries.
Intel is a trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
id, id Software and related logos are registered trademarks or trademarks of id Software LLC in the U.S. and/or other

countries. All Rights Reserved.

©

 1997 id Software LLC, a ZeniMax Media company. QUAKE, id, id Software, id Tech and related logos are registered

trademarks or trademarks of id Software LLC in the U.S. and/or other countries. Bethesda, Bethesda Softworks,

ZeniMax and related logos are registered trademarks or trademarks of ZeniMax Media Inc. in the U.S. and/or other

countries. All Rights Reserved.
RealNetworks and RealVideo are registered trademarks of RealNetworks, Inc.
are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
TechSmith

®

 and Camtasia

®

 are either registered marks or marks of TechSmith Corporation in the U.S. and/or other

countries.
ATI is a trademark of Advanced Micro Devices, Inc.

Tria News User Manual — Document Information • 

iii

Summary of Contents for Abekas Tria News




























































Reviews: