Getting Started
The server consists of a single 2RU chassis that contains all of the video/key/audio processing hardware and a removable
SSD for media storage. The server runs a standard Microsoft
®
Windows
®
operating system with the pre-installed
Abekas
®
software applications for interacting with the video processing hardware.
Power On/Off
The system powers on with the single power button located at the front of the chassis. When the power button is pressed
the system will boot up and launch Windows
®
.
Warning:
Even with the system powered off, hazardous voltages are present inside the chassis. Disconnect both the primary
and secondary power supplied before opening up the chassis.
Windows
®
Login
The server comes with the Microsoft
®
Windows
®
operating system and all the required software pre-installed.
Refer to the Windows
®
help system for information on changing the password.
Note:
Once you have logged in to the system, the video channels and serial control are all active. If you are using an external serial
controller, that controller can now be used to control the video channels (including loading and playing clips).
Software
The server comes pre-installed with all the software needed for operation and setup.
•
Tria Explorer
— provides a graphical interface to the operation of the server.
•
Tria Config
— allows you to configure the hardware of the server.
10
• Getting Started — Tria News User Manual
Summary of Contents for Abekas Tria News
Page 1: ...Tria News User Manual...
