4
Package Contents
The following contents should be found in your package:
One RFS-108P Switch
One power cord
This User Guide
Racket-mount brackets
Wall-mount kit
Note:
Make sure that the package contains the above items. If any of the listed items are
damaged or missing, please contact with your distributor.
Introduction
The device is a powerful, high-performance Fast Ethernet Switch, with all
8 ports capable of 10 or 100Mbps auto-negotiation operation (NWay),
which means this switch could automatically negotiate with the connected
partners on the network speed and duplex mode. It is ideal for
micro-segmenting large networks into smaller, connected subnets for
improved performance, enabling the bandwidth demanding multimedia
and imaging applications. Moreover, the 10/100Mbps auto-sensing ability
provides an easy way to migrate 10Mbps to 100Mbps network with no
pain.
This switch supports PoE, which supplies power for connected devices
via CAT 5 and above twisted cables. By integrating the data transmitting
cable and power cord, it eliminates the effort constructing your network.
You could easily connect a Wireless AP or a VoIP phone to this switch
without looking outlets for them. Over current protection and circuit
shorting protection are also supported to ensure the safety.
The switch is plug-n-play without any software to configure and also fully
compliant with all kinds of network protocols. Moreover, the rich
diagnostic LEDs on the front-panel provide the operating status of
individual port and whole system.
Key Features
Compliant with IEEE802.3az Energy Efficient Ethernet which allows
individual ports to enter a low power idle based on data flow usage.