![Rosenbauer 68206A-001 Operation Manual Download Page 55](http://html1.mh-extra.com/html/rosenbauer/68206a-001/68206a-001_operation-manual_1487680055.webp)
55 / 97
16
Introduction
16.1 Preface
This manual is to be read through carefully and all regulations and advice
observed before commissioning the product.
Also observe the documents of the corresponding manufacturers supplied
in addition to this manual.
All persons, who deal with the operation and maintenance of the product,
must be correspondingly qualified, have read this manual fully and follow
it exactly.
The manual is always to be kept at the site of operation of the product.
16.2 Liability and injury
Due to the information in this manual Rosenbauer fundamentally accepts
no liability for direct damage or consequential damage, which arise from
incorrect operation or maintenance, as well as by unauthorised changes
of components or this manual.
The product may only be operated by persons who are familiar with the
manual, the product as well as the national laws, guidelines and regula-
tions pertaining to work, safety and accident prevention.
Rosenbauer assumes no responsibility for injury to persons or material
damage, which are caused by untrained personnel, also through non-
compliance with the regulations regarding work, safety and accident pre-
vention.
If this manual contains a technical error or a typographical error,
Rosenbauer reserves the right to make change at any time and without
notice.
This manual may contains figures and descriptions, that are not built into
the delivered product.
No claims may be made for products that have already been delivered
from the information, figures and descriptions in this manual.
For your own safety only use spare parts and accessory products from
Rosenbauer. Rosenbauer accepts no liability for the use of other products
and the resulting damage!
Check the delivery immediately for transport damage and completeness.
•
Faults and damages must be documented in writing immediately.
•
Photograph damaged components.
•
Send written damage report to the manufacturer - see chapter "Man-
ufacturer and customer service address".
Introduction
Identification
EN
EN
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12