Rosemount 248, Reference Manual

Page: 44 / 80

Reference Manual
00809-0100-4825, Rev BB
August 2005
Rosemount 248
4-6
375 Field Communicator
Table 4-2 provides a guide to diagnostic messages used by the 375 Field
Communicator.
Variable parameters within the text of a message are indicated with the
notation
<variable parameter> . Reference to the name of another message is
identified by the notation [another message] .
Table 4-2. 375 Field
Communicator
Diagnostics Messages
Message Description
Add item for ALL device types or only for
this ONE device type Asks the user whether the hot key item being added should be added for all device types or
only for the type of device that is connected.
Command Not Implemented The connected device does not support this function.
Communication Error Either a device sends back a response indicating that the message it received was
unintelligible, or the 375 Field Communicator cannot understand the response from the device.
Configuration memory not compatible with
connected device The configuration stored in memory is incompatible with the device to which a transfer has
been requested.
Device Busy The connected device is busy performing another task.
Device Disconnected Device fails to respond to a command.
Device write protected Device is in write-protect mode. Data can not be written.
Device write protected. Do you still want to
shut off? Device is in write-protect mode. Press YES to turn the 375 Field Communicator off and lose the
unsent data.
Display value of variable on hotkey menu? Asks whether the value of the variable should be displayed adjacent to its label on the hotkey
menu if the item being added to the hotkey menu is a variable.
Download data from configuration memory
to device Prompts user to press SEND softkey to initiate a memory to device transfer.
Exceed field width Indicates that the field width for the current arithmetic variable exceeds the device- specified
description edit format.
Exceed precision Indicates that the precision for the current arithmetic variable exceeds the device- specified
description edit format.
Ignore next 50 occurrences of status? Asked after displaying device status. Softkey answer determines whether next 50 occurrences
of device status will be ignored or displayed.
Illegal character An invalid character for the variable type was entered.
Illegal date The day portion of the date is invalid.
Illegal month The month portion of the date is invalid.
Illegal year The year portion of the date is invalid.
Incomplete exponent The exponent of a scientific notation floating point variable is incomplete.
Incomplete field The value entered is not complete for the variable type.
Looking for a device Polling for multidropped devices at addresses 1–15.
Mark as read only variable on hotkey
menu? Asks whether the user should be allowed to edit the variable from the hotkey menu if the item
being added to the hotkey menu is a variable.
No device configuration in configuration
memory There is no configuration saved in memory available to re-configure off-line or transfer to
a device.
No Device Found Poll of address zero fails to find a device, or poll of all addresses fails to find a device if
auto-poll is enabled.
No hotkey menu available for this device. There is no menu named “hotkey” defined in the device description for this device.
No offline devices available. There are no device descriptions available to be used to configure a device offline.
No simulation devices available. There are no device descriptions available to simulate a device.
No UPLOAD_VARIABLES in ddl for this
device There is no menu named “upload_variables” defined in the device description for this device.
This menu is required for offline configuration.
No Valid Items The selected menu or edit display contains no valid items.
OFF KEY DISABLED Appears when the user attempts to turn the 375 Field Communicator off before sending
modified data or before completing a method.
Online device disconnected with unsent
data. RETRY or OK to lose data. There is unsent data for a previously connected device. Press RETRY to send data, or press
OK to disconnect and lose unsent data.
Out of memory for hotkey configuration.
Delete unnecessary items. There is no more memory available to store additional hotkey items. Unnecessary items should
be deleted to make space available.