- 40 -
- 41 -
2-2-1-2. PCM Resampling Frequency
• This is the menu to set the Sampling Frequency. Select Original Sampling Rate if you want to
output the original sound or select the desired sampling rate (44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, or 192 kHz) to use the re-sampling function.
2-2-1-3. DSD Mode
• This is the menu to select the transmission format (Native, DOP, PCM) of audio samples to be delivered to
the DAC when playing DSD music files. For USB DACs, you need to select and use Native, DOP, and DSD to
PCM to play DSD music files, depending on the type of DAC you connected to.
2-2-1-4. Roon Volume Control
• This is the menu to select the volume control method (Hardware, Software, Fixed) in RoonReady
mode. You can select Hardware/Software/Fixed for USB DAC, but if USB DAC does not support the
hardware volume control function, the volume will not be adjusted for hardware selection.
2-2-1-5. OUTPUT Gain
• This is the menu to adjust the Gain value of Digital Output. If distortion occurs when connecting
with an external receiver or DAC, adjust the Output Gain value accordingly.
2-2-2. HDMI
• You can set up HDMI.
• When you select the setting icon for the HDMI, the HDMI Setting screen appears as shown below.
2-2-2-1. PCM Resampling Frequency
• This is the menu to set the Sampling Frequency. Select Original Sampling Rate if you want to
output the original sound or select the desired sampling rate (44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, or 192kHz) to use the re-sampling function.
2-2-2-2. DSD Mode
• This is the menu to select the transmission format (Native, DOP, PCM) of audio samples to be
delivered to the DAC when playing DSD music files. For HDMI output, only DSD to PCM is possible.
2-2-2-3. Roon Volume Control
• This is the menu to select the volume control method (Hardware, Software, Fixed) in RoonReady
mode. For HDMI output, you can select “Software” or “Fixed”.
