- 28 -
- 29 -
• 3-6-3.
Reboot after installing UsbAudio Sound and USB Controller.
• 3-6-4.
After driver installation is complete, switch the source to USB IN in the In/Out Setting,
and you can check the RS150B-DAC on your PC as shown below.
• 3-6-5.
When you set the sound device to RS150B-DAC in the system tray area of your PC, you are
ready to use the device connected to the USB IN port.
3-7. WiFi / Bluetooth Connection
• You can connect the USB WiFI/BT dongle module to the USB WiFi/BT DONGLE port of this product
as shown in the figure below.
※
For the WiFi / BT DONGLE, it is recommended to use Bluetooth 4.0 or higher and 2.4GHz/5GHz dual-
band WiFi.
※
For a detailed description of WiFi, refer to “Network Connection” – “WiFi Connection (Wireless)”.(p. 33)
4. External Memory Devices (USB, Micro SD) and
SATA Storage Devices
• This product can connect external memory devices and SATA type storage devices.
• When connecting a storage device using SATA, it is recommended to use an SSD.
• USB storage devices are compatible up to 10TB, Micro SD up to 400GB, and SATA storage devices
up to 4TB.
※
SSD can be purchased separately, and only 7mm thickness can be used.
