Roscoe Medical INTENSITY 10, Instruction Manual

Page: 22 / 72

22
2. It is recommended, at minimum, 1.5” x 1.5” self-adhering
electrodes be used at the treatment area.
3. Inspect your electrodes before every use. Replace electrodes
as needed. Reusable electrodes can cause slight skin irritation,
lose adhesion properties and deliver less stimulation if
overused.
Reusable, Self-adhering electrodes
TO USE THESE ELECTRODES
TO REMOVE YOUR ELECTRODES
1. Attach the electrode to the lead wire.
2. Remove the protective backing from the electrode surface. Do
no throw away the protective backing because it can be reused
after the treatment session has been completed.
3. Place the tacky surface to the prescribed skin area by pressing
the electrode firmly against the skin.
1. Lift the corner of the electrode and gently remove it from the
skin.
2. It may be helpful to improve repeated electrode application by
spreading a few drops of cold water over the adhesive side
and turn the surface up to air dry. Over saturation with water
will reduce the adhesive properties.
3. Between uses, place the electrodes back onto the protective
sleeve and insert them into the re-sealable bag and store in a
cool dry place.