Roscoe Medical INTENSITY 10, Instruction Manual

Page: 18 / 72

18
alternative stimulation settings and/or electrode placements. Once
an acceptable location has been achieved, mark down the electrode
sites and the device settings, so the patient can easily continue
treatment on their own.
4.5 Turning On the Device
Before using the device for the first time, you are strongly advised
to take careful note of the contraindications and safety measures
detailed at the beginning of this manual (Safety information), as this
powerful equipment is neither a toy nor a gadget!
To turn on the device, PRESS and RELEASE the ON/OFF
button. The operation page will appear on the LCD screen.
4.6 Select the therapeutic part program
InTENSity™ TENS Stimulator is equipped with 10 pre-set programs.
For details on how to program please refer to Section 5 “Programs”.
The therapeutic body part program can be selected by pressing the
[S] button control.
The therapeutic body part program indicator will flash after you
have selected it. Apply electrodes to the exact site indicated by your
physician or therapist.
4.7 Select the treatment time
There are 4 choices available for the treatment time: 15 min,
30 min, 60 min and Continuous. The treatment time can be selected
by pressing the [T] button.
4.8 Adjust channel intensity
Press the intensity control button up [▲] or down [▼] to control the
intensity output. Slowly press the intensity button up until you reach
the setting recommended by your physician or therapist. Repeat for
the other channel, if both channels are to be used.