8
PDC (Power/Data Control) Module Installation
1. Prepare all the parts necessary for installation.
2. Find the location of the fuse box in the vehicle. Identify the
fuses for connection of the
RED
POWER wire and the
YELLOW
IGNITION wire. Identify appropriate location for
installation of the PDC Module in the vehicle.
3. Identify approximate Dual-Vision™ XC Recorder location
on windshield. Confirm sufficient cable length available to
connect PDC to the Dual-Vision™ XC Recorder. Remove
the A-Pillar cover and insert the cable at the gap between
ceiling and windshield.
4. After determining that PDC location is appropriate, trim the
cable length as necessary, and make the following
connections:
a. Connect the BLACK WIRE (GROUND -) with ring
terminal to a chassis ground.
b. Connect the
RED
wire (POWER +) to a constant –
powered source which will remain live after the
ignition is turned OFF.
c. Connect the
YELLOW
wire (IGNITION) to an ACC
power source.
EXAMPLE:
Ground Wire Ring
Terminal connected to the
vehicle chassis ground
