14
SD Card
IMPORTANT
Remember to ALWAYS disconnect POWER prior to removal of SD Card from
Dual-Vision™ XC Recorder.
•
When parking surveillance mode is OFF, turn ignition off. It is safe to remove the SD card
after the Recorder’s LCD display turns off.
•
If parking surveillance mode is ON, turn ignition off and wait for few seconds until the LCD
display begins blinking. Then press and hold the Event Release Button for 3 seconds. The
LCD will turn off following a chime. It is safe to remove the SD card after the display turns
off.
Do Not Use
SD Card for any other purpose. Using this SD Card for any other purpose or removing the
card while the Recorder is powered may cause a fatal error on the SD Card. You will lose important data
if SD card is removed when powered.
Recommended:
Create a folder on PC and copy Dual-Vision™ XC files from SD Card.
At least once per month, format the SD Card using the included “SDFormatterv3.0” program to prevent
SD Card errors from occurring over a long period of time. Note that upon formatting the SD Card, all
existing operating and data files will be deleted. Be sure to perform a backup of any important video files
and configuration prior to reformatting. After formatting, you may insert the SD card into Dual-Vision™
XC. The Recorder will automatically write the Configuration file to the SD card. The “Player” program
does not automatically re-install onto the SD Card. If desired, it may be added manually by copying and
pasting from another location. A new Data folder will be created on the reformatted SD Card and new
Data files will be created as driving resumes.
Consult Rosco or your Authorized Reseller for SD Card compatibility. Not all SD Cards work with Dual-
Vision
TM
XC unit. The following is a list of approved SD Cards which may be purchased from Rosco. This
list may be periodically updated without notice.
MEMORY
SD CARD
16GB
San Disk Ultra SDHC Class 4
Transcend SDHC Class 4
Transcend SDHC Class 6
Transcend SDHC Class 10
32GB
Transcend SDHC Class 6
Transcend SDHC Class 10
In case your computer does not support the SDHC Memory Card Standard, use a separate SDHC
USB 2.0 reader (SD to USB adapter).
LCD OFF
LCD
ON
EVENT
RELEASE
BUTTON
