28
Recessed grips for carrying
The appliance has two recessed grips for easy and safe transport. The
recessed grips are on the right and left underside of the base.
Integrated cord wind-up
The appliance has a practical cord wind-up on the underside.
Residual heat indication
The appliance has a separate residual heat indication for each grilling
zone. The indications are active if the appliance is in stand-by mode, i. e. if
the appliance is connected to the mains.
If one of the grilling zones measures a temperature >60 °C, the LEDs “2 - 4” of the respective temperature
display will glow yellow.
NOTE:
Do not carry the appliance when hot!
NOTE:
Prior to operation, before inserting the grill plate or
removing the control unit it is necessary to unwind the whole
power cord!
Assembling and demounting the splash guard/wind shield
Warning – hazard of injury and burns! Base surfaces, control unit, grill plate, splash guard/
wind shield and food are getting hot during use!
Assembling and demounting the splash guard/wind shield
• Take a short side part and position it in the recesses of the longer part. Make sure that the stiffening
channel faces outwards and the hooks face inwards.
• Now, press the short side part downwards and let it engage.
• Repeat this procedure with the second short side part.
• Demount it in reverse order.
