14
RolliBot RolliCool Mini-Split AC User Manual
Ensure that the rubber stopper is placed in a suitable location. If the Indoor and Outdoor Units are disconnected e.g. when
the unit is being moved, the rubber stopper should be reinstalled into the end of the Coupler. If separating the two, review
the following section.
3.3 – Connecting the Coupler
Step 1.
Unscrew the screw at the right side of the
cover. Push the button at the right side of the
cover and pull it away from the unit to remove
it.
Step 2.
Remove the rubber stopper from the end of
the Coupler if it is installed. Open the latch
and line the Coupler up with its connectors.
Step3.
Make sure the Coupler is properly threaded
into its connectors and push it straight down.
Step 4.
Slowly close the latch, taking care to use even
pressure on the latch.
Step 5.
Connect the power cable to the inside of the
unit.
Step 6.
Replace the Coupler Cover. Make sure to add
the screw.
Cover
Power Cable
Keep the Coolant
Lines straight
