manualshive.com logo in svg

Roland XP-60, Owner'S Manual

The Roland XP-60 is a versatile synthesizer workstation that offers an extensive range of sounds and features. To get the most out of this incredible device, make sure to download its free Owner's Manual from our website. With this comprehensive manual, you'll have all the information you need to unlock the full potential of the Roland XP-60.

Share
Download
background image

Reverb Send Level: 1–127
EFX Output Assign: MIX
EFX Output Level: 1–127
EFX Chorus Send Level: 0
EFX Reverb Send Level: 0
Chorus Level: 1–127
Chorus Output Assign: MIX
Reverb Level: 1–127

Using parallel and series connections simultane-
ously:

Output Assign: EFX
Mix/EFX Send Level: 1–127
Chorus Send Level: 1–127
Reverb Send Level: 1–127
EFX Output Assign: MIX
EFX Output Level: 1–127
EFX Chorus Send Level: 1–127
EFX Reverb Send Level: 1–127
Chorus Level: 1–127
Chorus Output Assign: M+R
Reverb Level: 1–127

Sending unprocessed direct sound to the DIRECT
OUTPUT jack:

Output Assign: DIR

Sending sound through the EFX to the DIRECT
OUTPUT jack:

Output Assign: DIR
Mix/EFX Send Level: 1–127
EFX Output Assign: DIR
EFX Output Level: 1–127

...........................................................................................................

EFX  Param display

EFX parameters that you can set differ by the type selected
using the EFX Type parameter. For details refer to “EFX
effect types (EFX Parameter)” (p.74).

EFX Control display

As with Tone parameters, you can also modify EFX parame-
ters using controllers. EFX parameters that can be controlled
are indicated in parentheses (   ). They will differ by the EFX
Type parameter (PATCH/Effects/General) settings. For
details refer to “EFX effect types (EFX Parameter)” (p.74).

...........................................................................................................

<Control Source>

Each Patch can have two controller assignments (EFX Ctrl
1–2), and you can assign the following controllers to Control
Source. 

OFF

: A controller will not be used.

SYS-CTRL1

: System controller 1

SYS-CTRL2

: System controller 2

MODULATION

: Modulation (MIDI controller number 1)

BREATH

: Breath (MIDI controller number 2)

FOOT

: Foot (MIDI controller number 4)

VOLUME

: Volume (MIDI controller number 7)

PAN

: Pan (MIDI controller number 10)

EXPRESSION

: Expression (MIDI controller number 11)

PITCH BEND

: Pitch bend 

AFTERTOUCH

: Aftertouch

✳

If you want to use a controller that is common to all
Patches, or to use a controller that is not available for
selection here, first select SYS-CTRL1 or SYS-CTRL2
for Control Source, then use the Sys-Ctrl1 parameter
(SYSTEM/Control/Control Assign) or Sys-Ctrl2 para-
meter (SYSTEM/Control/Control Assign) to select the
controller.

...........................................................................................................
...........................................................................................................

<Depth>

Adjusts the degree of EFX parameter changes to occur in
response to controller movement. Higher values will result
in more change. Negative (-) values will invert the change
direction.

...........................................................................................................
...........................................................................................................

<Peak&Hold>

Pedal messages conventionally hold only note messages–
not effects settings. This makes it impossible to hold effects
settings as you play the phrase.

The XP-80 can hold parameter value changes (maximum
change value) even when the controller is returned to its
original position after receiving pedal messages. 

...........................................................................................................

63

Chapter 3. Creating your own sounds

[PATCH]

➞

[F6] (Effects)

➞

[F2] (EFX Prm)/[F3] (EFX Ctl)

Summary of Contents for XP-60

























































































































































































































































Reviews:

No comments

Related manuals for XP-60

Icare PRO Quick Manual preview
PRO
Brand: Icare Pages: 3
Danfoss 40 Calibration Instruction preview
40
Brand: Danfoss Pages: 8
Ibanez Sound Wave 115S Owner'S Manual preview
Sound Wave 115S
Brand: Ibanez Pages: 2
National Instruments PXIe-5665 Calibration Manual preview
PXIe-5665
Brand: National Instruments Pages: 85
National Instruments PXIe-5622 Getting Started Manual preview
PXIe-5622
Brand: National Instruments Pages: 12
National Instruments PXIe-4163 Manual preview
PXIe-4163
Brand: National Instruments Pages: 18
National Instruments USB-5683 Getting Started Manual preview
USB-5683
Brand: National Instruments Pages: 12
Xylem YSI Pro1030 User Manual preview
YSI Pro1030
Brand: Xylem Pages: 19
Jenoptik LDM51 Series Operating Manual preview
LDM51 Series
Brand: Jenoptik Pages: 54
Hanna HI 84502 Instruction Manual preview
HI 84502
Brand: Hanna Pages: 44
Hauber Elektronik HE205 Series Manual preview
HE205 Series
Brand: Hauber Elektronik Pages: 28
Hanna Instruments HI97704 Instruction Manual preview
HI97704
Brand: Hanna Instruments Pages: 28
UEi C85 Instruction Manual preview
C85
Brand: UEi Pages: 16
Olsson Custom Reverb 18 Owner'S Manual preview
Custom Reverb 18
Brand: Olsson Pages: 8
Dadam micro GreenOK User Manual preview
GreenOK
Brand: Dadam micro Pages: 24
promesstec MDH 500 User Manual preview
MDH 500
Brand: promesstec Pages: 72
Universal Laser Systems ULS-25PS Operation Manual preview
ULS-25PS
Brand: Universal Laser Systems Pages: 100
NCL DUAL-BLEND 4114 Installation And Setup Manual preview
DUAL-BLEND 4114
Brand: NCL Pages: 7

Brands by name

Popular brands

Load more brands