Roland XP-60, Owner'S Manual

Page: 193 / 248

193
Chapter 12. Supplementary material
Control Switch Display (P.59)
Parameter Name Full Name of Parameter Value
Volume Volume control switch OFF,ON
Pan Pan control switch OFF,CONTINUOUS,KEY-ON
Pitch Bend Pitch bend control switch OFF,ON
Hold-1 Hold-1 control switch OFF,ON
Redamper Redamper control switch OFF,ON
Effects Group
General Display (P.60)
Parameter Name Full Name of Parameter Value
Output Assign Output assign MIX,EFX,DIR
Mix/EFX Send Level Mix/EFX send level 0—127
Chorus Send Level Chorus send level 0—127
Reverb Send Level Reverb send level 0—127
EFX Type EFX type 01—40
EFX Output Assign EFX output assign MIX,DIR
EFX Output Level EFX output level 0—127
EFX Chorus Send Level EFX Chorus send level 0—127
EFX Reverb Send Level EFX Reverb send level 0—127
EFX Param Display (P.74)
Refer to EFX parameters
EFX Control Display (P.63)
Parameter Name Full Name of Parameter Value
EFX 1 Control Source EFX 1 Control Source 1*
EFX 1 Control Depth EFX 1 Control Depth -63—+63
EFX 2 Control Source EFX 2 Control Source 1*
EFX 2 Control Depth EFX 2 Control Depth -63—+63
EFX Ctrl Peak&Hold EFX control source peak&hold OFF,HOLD,PEAK
1*: OFF,SYS-CTRL1,SYS-CTRL2,MODULATION,BREATH,FOOT,VOLUME,PAN,EXPRESSION,PITCH BEND,AFTERTOUCH
Chorus Display (P.64)
Parameter Name Full Name of Parameter Value
Level Chorus level 0—127
Rate Chorus rate 0—127
Depth Chorus depth 0—127
Pre-Delay Chorus pre delay 0—127
Feedback Chorus feedback level 0—127
Output Chorus output assign MIX,REVERB,MIX+REV
Reverb Display (P.64)
Parameter Name Full Name of Parameter Value
Type Reverb/Delay type 1*
Level Reverb/Delay level 0—127
Time Reverb/Delay time 0—127
HF damp Reverb/Delay HF damp 2*
Delay Feedback Delay feedback level 0—127
1*: ROOM1,ROOM2,STAGE1,STAGE2,HALL1,HALL2,DELAY,PAN-DLY
2*: 200,250,315,400,500,630,800,1000,1250,1600,2000,2500,3150,4000,5000,6300,8000 Hz,BYPASS