manualshive.com logo in svg

Roland XP-60, Owner'S Manual

The Roland XP-60 is a versatile synthesizer workstation that offers an extensive range of sounds and features. To get the most out of this incredible device, make sure to download its free Owner's Manual from our website. With this comprehensive manual, you'll have all the information you need to unlock the full potential of the Roland XP-60.

Share
Download
background image

Ctrl Change (Control change)

This MIDI message applies modulation, expression or other
effects corresponding to each Controller number. 

✳

For functions corresponding to each Controller num-
ber, see “MIDI Implementation” (p.214).

CC# (Controller number)

: The function name corresponding

to each Controller number will be displayed within paren-
theses (   ).

Prog Change (Program change)

This MIDI message changes the instrument sound. 

Channel Aft (Channel aftertouch)

This MIDI message applies aftertouch to each MIDI channel. 

Pitch Bend 

This MIDI message modifies pitch. 

Tune (Tune request)

This MIDI message tunes an analog synthesizer.

Pattern (Pattern Call message)

This message commands a Pattern to play back. The Song
position next to the end of the Pattern will be displayed in
parentheses (   ).

Sys.Excl (System exclusive message)

This message is commonly used for all connected MIDI
devices in a system. If a System Exclusive message is too
long to be displayed on a single line, “>” will appear at
screen right.

System Exclusive message

: F0:... (hex number)... :F7

Data handled by the Tempo track

The Tempo track contains tempo change data of a song.

Tempo Change 

Determines the tempo of a song. The song will play back
using this Tempo Change value.

The displayed (

=) value is the tempo at which the song

actually plays back (playback tempo) and can be modified
only on the Play display (SEQ).

If the Tempo Change value differs from the playback tempo,
it shows that playback tempo has been modified temporari-
ly. As the Tempo Change value has not yet been rewritten,
this temporary setting will be lost if another song is selected
or power off. If you wish to use the same tempo when play-
ing back the song for the next time, save the song again to
disk. This will rewrite the Tempo Change value so that it
will equal the playback tempo. 

Value

: Tempo Change

Data handled by the Beat track

The Beat track contains the beat change data and the key sig-
nature which determines whether black keys will be dis-
played as sharps (#) or flats (b). 

Beat Change

Determines the time signature. 

Key Signature

This changes how black keys will be displayed and does not
effect song recording method.

1-01-000 16 Ctrl Change  CC#=1(Modulation) 127

MIDI channel

Controller number (Function name)

Control change

Value

1-01-000 16 Prog Change PC#=64

MIDI channel

Program number

Program change

1-01-000 16 Channel Aft   Val=64

MIDI channel

Value

Channel aftertouch

1-01-000 16 Pitch Bend  Val=+8191

MIDI channel

Value

Pitch bend

1-01-000   Tune

Tune request

1-01-000   Pattern   Num=001 (->1-01-000)

Pattern call message

Pattern number

1-01-000   Sys.Excl  F0:41 10 6A 12 00 00 00>

Data

System exclusive message

1-01-000 Tempo Change Value=120 (

=120) 

Tempo change value

Tempo change

Playback tempo

1-01-000 Beat Change Beat=4/4 

Beat change

Beat

1-01-000 Key Signature Scale=MAJOR C#(#######) 

Key signature

Scale

Key (Number of sharps
or flats on staff notation)

145

Chapter 5. Editing a song

[SEQUENCER]

➞

[F4] (Micro)

Summary of Contents for XP-60

























































































































































































































































Reviews:

No comments

Related manuals for XP-60

Omega Engineering DFG35 Series User Manual preview
DFG35 Series
Brand: Omega Engineering Pages: 22
Quantel ULTRA Quick Start Manual preview
ULTRA
Brand: Quantel Pages: 2
Roland ep-77 Service Notes preview
ep-77
Brand: Roland Pages: 15
LaserLiner LaserRange-Master T4 Pro Manual preview
LaserRange-Master T4 Pro
Brand: LaserLiner Pages: 68
LaMotte DC1500 CHLORINE User Manual preview
DC1500 CHLORINE
Brand: LaMotte Pages: 60
Shimpo DT209X Instruction Manual preview
DT209X
Brand: Shimpo Pages: 68
MICRO-EPSILON ODC 2600-40 Operating Instructions Manual preview
ODC 2600-40
Brand: MICRO-EPSILON Pages: 82
Kingfisher KI 9600A-Ge Operation & Maintenance Manual preview
KI 9600A-Ge
Brand: Kingfisher Pages: 52
HANLA HGS-100 Technical Manual preview
HGS-100
Brand: HANLA Pages: 12
LaserLine LaserRange-Master i5 Manual preview
LaserRange-Master i5
Brand: LaserLine Pages: 68
PowerMetrix PowerMaster MTA15Z Product Manual preview
PowerMaster MTA15Z
Brand: PowerMetrix Pages: 13
OrienTek TPM-25m Quick Start Manual preview
TPM-25m
Brand: OrienTek Pages: 2
Raycus A6000D User Manual preview
A6000D
Brand: Raycus Pages: 86
Environmental Express 35643-00 Instruction Manual preview
35643-00
Brand: Environmental Express Pages: 17
FORK 301-012 Instruction Manual preview
301-012
Brand: FORK Pages: 4
Rigol DS6104 How-To Manual preview
DS6104
Brand: Rigol Pages: 8
YOKOGAWA 701947 User Manual preview
701947
Brand: YOKOGAWA Pages: 2
PCB Piezotronics 357B12 Installation And Operating Manual preview
357B12
Brand: PCB Piezotronics Pages: 13

Brands by name

Popular brands

Load more brands