manualshive.com logo in svg

Roland VersaUV LEF-20, Master Manual

Share
Download
Roland VersaUV LEF-20 Master Manual Download Page 38

About Maintenance

36

Chapter 2  Maintenance

Important notes on this procedure

•  Cleaning requires the cleaning liquid and 

cleaning sticks included with the printer and 
commercially available glass cleaner, so have 
these items ready .

•  Before performing this operation, remove 

any media .

•  To prevent the heads from drying out, finish 

this procedure in 10 minutes or less . A 
warning beep sounds after 10 minutes .

•  Never use any implements other than the 

included cleaning sticks . Cotton swabs or 
other lint-producing items may damage 
the heads . If you use up the cleaning sticks, 
purchase new ones from your authorized 
Roland DG Corp . dealer .

•  Use one cleaning stick per cleaning session, 

and then discard the stick after use . Reusing 
cleaning sticks will reduce the printing 
quality .

•  Do not put a cleaning stick that has been 

used for cleaning into the cleaning liquid . 
Doing so will deteriorate the cleaning liquid .

•  Never rub the nozzle surface of the heads .
•  Stroke the sponges very gently, applying as 

little pressure as possible . Never rub, scrape, 
or crush them .

If a warning beep sounds during 
cleaning

A warning beep sounds 10 minutes after 
operation begins . Stop work, close the front 
cover, and then press [ENTER] to end the 
manual cleaning mode . After that, restart 
operation from the first procedure .

 CAUTION

Be sure to perform operations 
as specified by the instructions 
above, and never touch any area 
not specified in the instructions .

Failure to observe this instruction 
may cause the machine to move 
suddenly, resulting in injury .

1 . Change to the print-head manual-

cleaning mode

NOTE

Be sure to hold the handle of the front cover 
and open and close it gently .

1. 

Remove any media . Close the front cover .

2. 

Press [MENU] .

3. 

Press [ ] to display the screen shown below .

MENU
SUB MENU

4. 

Press [ ], then [ ] .

SUB MENU
MAINTENANCE

5. 

Press [ ] .

MAINTENANCE
CLEANING

6. 

Press [ENTER] .

NOW PROCESSING..

The print-head carriage moves, and then the 
following screen appears .

OPEN FRONT
          COVER

7. 

Open the front cover .

FINISHED?

Summary of Contents for VersaUV LEF-20













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands