37
2. Assembly and Ink Filling
2.Installation
Step 8: Fill the Machine with Ink
Firstly, clean the print heads with cleaning liquid when installing ink cartridges for the first time after shipment
from the factory. After cleaning, fill the machine with the ink of each color.
The on-screen messages indicate which ink cartridges to insert and remove and when to insert and remove them.
Follow the instructions given in P. 38 "2. Clean the print heads using the SOL INK cleaning cartridges." and P. 39
"3. Insert the ink cartridge for each color.".
Items Used in this Procedure
• Two SOL INK cleaning cartridges
• The ink cartridges to be used
IMPORTANT
• Be sure to use new SOL INK cleaning cartridges and ink cartridges.
• Never, under any circumstances, use anything other than the specified type of ink or cleaning liquid.
Installing the Ink Cartridges
IMPORTANT
• Insert each color ink cartridge into the slot labeled with the matching color. Inserting an incorrect cartridge
may lead to breakdowns. Be careful not to insert the wrong cartridges. If you insert an incorrect cartridge by
mistake, contact your authorized Roland DG Corporation dealer.
• Be sure to insert cartridges horizontally. Otherwise, cleaning and filling may not be performed properly.
