Specifications
56
3.Appendix
LEC2-300
Included items
Dedicated stand, power cord, blade, blade holder, media clamps, media
holders, replacement blade for separating knife, cleaning liquid, drain bottle,
User's Manual, etc.
*1
The media holders of this machine are designed to be used exclusively with media that has a paper tube (core) with an inner
diameter of 3 inches. To use 2-inch media, the optional media flanges are required.
*2
The length of printing or cutting is subject to the limitations of the program.
*3
• 500 gf is the maximum instantaneous blade force.
• The blade force must be adjusted according to details such as the media thickness.
*4
• Media type: Media specified by Roland DG Corporation
• Temperature: 25°C (77°F), humidity: 50%RH
• Roll media must be loaded correctly.
• Applicable when all pinch rollers that can be used with the media width are used
• Side margins: 25 mm (1.0 in.) or more for both the left and right margins
• Excluding expansion/contraction of the media
• Assumes all correction and adjustment functions of the machine have been used properly
*5
• Print travel: 1 m (39.4 in.)
*6
• [PREFEED] menu item must be set to "ENABLE."
Range for assured repetition accuracy
• For media with a width exceeding 610 mm (24.0 in.): Length: 4,000 mm (157.5 in.)
• For media with a width of 610 mm (24.0 in.) or less: Length: 8,000 mm (315.0 in.)
*7
• Provided that the media feed length is 3,000 mm (118.1 in.) or less
• Excludes the effects of slanted movement and of expansion and contraction of the media
*8
• Data size:
1,000 mm (39.4 in.) in the media-feed direction, 736 mm (29 in.) in the carriage-movement direction
• No lamination
• Automatic detection of crop marks at four points when media is reloaded
• During cutting, [PREFEED] menu item must be set to "ENABLE."
• Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media
*9
• Operating environment
Use in an operating environment
within this range.
