28
2.Installation
2. Assembly and Ink Filling
Step 2: Attach the Media Holders
WARNING
Perform this task with all power switches left switched off.
Failure to observe this instruction may cause the machine to move suddenly,
resulting in injury.
Procedure
A
Place the shafts on the stand.
B
Pass the left media holder onto the shafts.
Pass it through from the right edge as seen from the rear of the machine.
C
Move the left media holder to the left side of the shafts, and then attach the retaining screw.
It is sufficient to tighten the retaining screw lightly.
