background image

36

SYSTEM

OUTPUT

Here’s how to assign the audio outputs from the MASTER OUT jacks, DIRECT OUT jacks, and PHONES jack.

Parameter

Value

Explanation

[F1] button (PAD MAS tab)

PAD OUTPUT ASSIGN MASTER

PHONES (MASTER OFF), 

MASTER LR

Specifies each pad’s output from the PHONES jack and the MASTER OUT jacks (when Master Out 

(p. 36) is “NORMAL”).

[F2] button (PAD DIR tab)

PAD OUTPUT ASSIGN DIRECT

OFF, 1, 2, 1+2, MASTER DIRECT L, 

MASTER DIRECT R, MASTER DIRECT 

L+R

Specifies each pad’s output from the DIRECT OUT1, 2 jacks and the MASTER OUT jacks (when 

Master Out (p. 36) is “DIRECT”).

[F3] button (OTHER MAS tab)

OTHER OUTPUT ASSIGN 

MASTER

PHONES (MASTER OFF), 

MASTER LR

Specifies how ROOM and MFX are output from the PHONES jack and the MASTER OUT jacks (when 

Master Out (p. 36) is “NORMAL”).

[F4] button (OTHER DIR tab)

OTHER OUTPUT ASSIGN 

DIRECT

OFF, 1, 2, 1+2, 3, 4, 3+4, 5, 6, 5+6, 7, 

8, 7+8, MASTER DIRECT L, MASTER 

DIRECT R, MASTER DIRECT L+R

Specifies how ROOM and MFX are output from the DIRECT OUT1, 2 jacks and the MASTER OUT jacks 

(when Master Out (p. 36) is “DIRECT”).

OUTPUT ROUTING

Here’s how to make settings for output routing to the MASTER OUT jacks, DIRECT OUT jacks, and PHONES jack.

Parameter

Value

Explanation

[F1] button (ROUTING tab)

PadEq/Comp to Direct*1

OFF, ON

Specifies whether the pad equalizer (p. 15) and pad compressor (p. 16) effects are applied (ON) or 

are not applied (OFF) to the sound that is output from the DIRECT OUT jacks.
If this is “OFF,” the pad equalizer and pad compressor are bypassed for the output of the DIRECT 

OUT jacks.
If the OUTPUT ROUTING Master Out is “DIRECT,” and PadEq/Comp to Direct is “OFF,” the output from 

the MASTER OUT jacks also bypasses the pad equalizer and pad compressor.

PadComp to Phones

OFF, ON

Specifies whether the pad compressor (p. 16) is applied (ON) or is not applied (OFF) to the sound 

that is output from the PHONES jack.
If this is “OFF,” the pad compressor does not affect the output from the PHONES jack.
For example, this lets you use the pad compressor to reduce the dynamic range for the drum 

monitor or PA, but hear the full dynamics in the monitor headphones while you perform.

Master Out*1

NORMAL, DIRECT

Selects whether the output of the MASTER OUT jacks is the same signal as the DIRECT OUT jacks 

(DIRECT) or not (NORMAL).
If this is “DIRECT,” the output of the MASTER OUT jacks is not affected by the master compressor 

and master EQ, allowing you to use the MASTER OUT jacks as DIRECT OUT jacks (the setting of the 

[MASTER] knob does apply).
This setting also applies to the USB audio output to your computer.

[F2] button (LO CUT tab)

LoCut Frequency

20–200 Hz

Cuts the frequency region below the specified frequency (low cut).
This setting is common to all output jacks.

DirectOut*2

OFF, ON

Specifies whether low cut is applied (ON) or is not applied (OFF) to the sound that is output from 

the DIRECT OUT jacks.

MasterOut*2

OFF, ON

Specifies whether low cut is applied (ON) or is not applied (OFF) to the sound that is output from 

the MASTER OUT jacks.

PhonesOut

OFF, ON

Specifies whether low cut is applied (ON) or is not applied (OFF) to the sound that is output from 

the PHONES jack.

Summary of Contents for V-Drums TD-27



























































Reviews: