34
SYSTEM
HI-HAT
If you are using a hi-hat, adjust the offset on the TD-27.
This is necessary in order to correctly detect open/close operations and pedal movement.
Parameter
Value
Explanation
Trig Type
Refer to “Trig Type list” (p. 30).
Specifies the model of pad (trigger type) that is connected to each trigger input.
Hi-Hat Type
Type of hi-hat
This is set automatically according to the parameter selected in Trig Type.
Offset *1, *2
-100–+100 (automatically)
Extent of opening Hi-Hat
The bigger the value is, the wider the opening extent is.
Reference
For details on how to adjust the offset, refer to “Reference Manual” (PDF). You can make fine
adjustments to the hi-hat parameters as necessary.
Foot Splash Sens *2
-10–+10
Amount of how easy to make the foot splash
Noise Cancel *1, *2
1–3
Amount of strength to cancel the bow and edge noise when you play foot close.
The bigger the value is, the more difficult to have a noise excluding the foot close.
CC MAX *2, *3
90, 127
Value of control change that is transmitted in stepping the hi-hat pedal down completely.
* There’s no need to change this setting if you’re performed only with the TD-27 and the pads.
*1: This is shown only if Trig Type is set to “VH13” or “VH12.”
*2: Digitally-connected pads do not support hi-hat pedal performance.
*3: This is shown only if Trig Type is set to something other than “VH13” or “VH12”
