manualshive.com logo in svg

Roland V-Drums TD-27, Data List

Share
Download
Roland V-Drums TD-27 Data List Download Page 41

41

SYSTEM

AUTO OFF

Parameter

Value

Explanation

Auto Off

Specifies whether the unit will turn off automatically after a certain time has elapsed. If you don’t want the unit to turn off automatically, 

choose “OFF” setting.
OFF

The power does not turn off automatically.

4 HOURS

When four hours have elapsed without any pad being struck or any operation being performed, the 

unit will turn off automatically.

INFO

Displays information about the TD-27 itself, such as the program version.

Parameter

Explanation

[F1] button (PROGRAM tab)

Program Version

Displays the program version.

[F2] button (SAMPLE tab)

Imported Sample

Displays the number of imported user samples.

Memory Remain

Displays the remaining amount for user samples in user memory.

[F3] button (SD CARD tab)

Backup All

Displays the backup data saved on the SD card (all settings).

1 Kit

Displays the kit backup data saved on the SD card.

[F4] button (DIGITAL tab)

Pad

Indicates a pad that is digitally connected to the TD-27.

Program Version

Indicates the program version of a pad that is digitally connected to the TD-27.

Summary of Contents for V-Drums TD-27



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands