29
SYSTEM
TRIGGER
Here’s how to make trigger settings so that the signals from the pads can be accurately processed by the TD-27.
You’ll need to make these settings if you purchase a drum sound module by itself, or if you add pads to your drum set or connect pads other than
those that came with your drum set.
TRIGGER BANK
You can specify the type of pad (trigger type) used by each trigger input of the trigger bank.
Parameter
Value
Explanation
Bank No.
1–8
Trigger bank number
Trig Type
Refer to “Trig Type list” (p. 30).
Specifies the model of pad (trigger type) that is connected to each trigger input.
* You can’t change the trigger type of a trigger input that’s assigned to a pad that supports a
digital connection.
MEMO
When you specify the trigger type, the trigger parameters (with the exception of certain
parameters such as cross-stick cancel) are set to optimal values. These values are only general
guidelines; you can make fine adjustments as appropriate according to how you attach the pad
and how you use it.
[F1] button (PARAM)
This parameter is the same as the TRIGGER PARAM (p. 32).
