Roland Picza LPX-600, User Manual

Page: 24 / 64

Windows 2000

Start Windows and log on as "Administrator."

Insert the Roland Software Package CD-ROM into
the CD-ROM drive.
The window shown in the figure appears automatically.

Switch on the machine.
Wait a short while until the lights stop flashing.
The flashing continues for about one minute.
From this point on, keep the door closed
until installation ends. Failure to do so
switches off the power, which may prevent
installation from completing correctly.

Connect the included USB cable.
The [Found New Hardware Wizard] dialog box
appears.

Click [Next].
These lights flash clockwise
two at a time.
Press the power button.
USB connector USB cable
USB port
The back of
the machine
Computer
2-4 Installing and Setting Up the Software
22 2. Preparing the Machine