38
2. Installation and Setup
2. Installation and Setup
Connecting the Cables
Connecting the Power Cord
WARNING
Connect to an electrical outlet that complies with this machine’s ratings
(for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
WARNING
Handle the power cord, plug, and electrical outlet correctly and with care.
Never use any damaged article.
Using a damaged article may result in fire or electrical
shock.
WARNING
When using an extension cord or power strip, use one that adequately
satisfies the machine's ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or use of a lengthy
extension cord may cause fire.
WARNING
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
a malfunction.
WARNING
Connect to an electrical outlet. Never connect directly to a power distribu
-
tion panel or other such fixed wiring equipment.
Doing so increases the risk of fire o
r electrical shock.
Connecting to the Computer
Important
The machine must be connected to the computer after the Windows driver has been installed.
Use a USB cable to connect the machine to a computer. Do not connect the machine to the computer yet. Be
sure to connect according to the instructions on P. 40 "Installing the Software". If the machine is connected
before the driver has been installed, driver installation may fail, and it may not be possible to use the machine.
Important
The machine ID needs to be changed when connecting more than one machine.
If you connect more than one unit of this machine to a single computer, be sure to follow the procedure given on P.
50 "Connecting Multiple Units". Connecting before changing the ID may render the machine unusable.
Power cord
Power outlet